Windows Access to Samba Network Storage

Windows Access to Samba Network Storage¶

This guide documents how to configure Windows machines to access the Samba network storage server running on VM 1106.

Prerequisites¶

Samba storage VM running at IP: 192.168.1.167
Samba share name: storage
Samba username: mark
Samba password: [your configured password]
Windows machine on same local network (or connected via proxmox)

Configuration Steps¶

Step 1: Open File Explorer¶

Press Windows key + E to open File Explorer
Or click the File Explorer icon in the taskbar

Step 2: Access Map Network Drive Dialog¶

In File Explorer, right-click on "This PC" in the left sidebar
Select "Map network drive..." from the context menu

Step 3: Configure Drive Mapping¶

In the Map Network Drive dialog:

Drive letter: Select a drive letter from the dropdown (Z: is commonly used for network drives)
Folder: Enter the following path:
```
\\192.168.1.167\storage
```
✅ Check: "Reconnect at sign-in" (ensures drive remounts after reboot)
✅ Check: "Connect using different credentials" (allows specifying Samba username)
Click the "Finish" button

Step 4: Enter Samba Credentials¶

When the Windows Security credential prompt appears:

Username: Enter mark
Password: Enter the Samba password configured on VM 1106
✅ Check: "Remember my credentials" (stores credentials in Windows Credential Manager)
Click "OK"

Step 5: Verify Access¶

The mapped network drive should appear in File Explorer under "This PC"
The drive will show as "storage (\192.168.1.167) (Z:)" or similar
You should be able to browse, read, and write files to this location
Test by creating a test file or folder to confirm write access

Per-User Configuration¶

Important: Network drive mappings in Windows are per-user account.

Each Windows user account must map the drive independently
Each user follows the same steps above under their own Windows login
All users authenticate with the same Samba username (mark) and password
Credentials are stored separately for each Windows user in their own Credential Manager

Network Access Methods¶

Local Network Access¶

Use the local IP address:

\\192.168.1.167\storage

Works when Windows machine is on same LAN as VM 1106
This is the recommended method for local access

Remote Access via Tailscale¶

Use the Tailscale IP address:

\\[tailscale-ip]\storage

Replace [tailscale-ip] with the Tailscale IP assigned to VM 1106
Works from anywhere when both machines are connected to Tailscale network
Check Tailscale admin console or run tailscale ip on VM 1106 to find the IP

Troubleshooting¶

Drive Doesn't Reconnect After Reboot¶

Verify "Reconnect at sign-in" was checked during setup
Check Windows Credential Manager to ensure credentials are saved:
Control Panel → User Accounts → Credential Manager → Windows Credentials
Look for entry: 192.168.1.167
If credentials are missing, re-map the drive following the steps above

Access Denied Errors¶

Credentials may have been cleared or expired
Re-map the drive following the configuration steps
Ensure Samba password hasn't changed on VM 1106
Verify the Samba user mark has appropriate permissions

Can't Connect to \192.168.1.167¶

Verify VM 1106 is running on Proxmox host .125:
```
# On Proxmox host .125
qm status 1106
```
Ping the VM from Windows Command Prompt:
```
ping 192.168.1.167
```

Verify Samba service is running on VM 1106:

# On VM 1106
sudo systemctl status smbd

Check firewall rules on VM 1106:
```
# On VM 1106
sudo ufw status
```

Ensure ports 139 and 445 are allowed for Samba.

Credential Prompt Keeps Appearing¶

Delete existing credentials from Windows Credential Manager
Re-map the drive ensuring "Remember my credentials" is checked
Verify the Samba password is correct

Samba Server Configuration Details¶

VM Information¶

VM ID: 1106 on Proxmox host .125 (nuc5)
VM IP: 192.168.1.167
Share name: storage
Share path on VM: /mnt/storage
Storage device: 2 TB Samsung T7 external SSD
Valid user: mark
Permissions: read/write (0775)

Samba service: smbd
Tailscale: Installed and configured for remote access
Auto-mount: External SSD auto-mounts at /mnt/storage on VM boot

Configuration Files on VM 1106¶

Main Samba configuration:

/etc/samba/smb.conf

Auto-mount configuration for external SSD:

/etc/fstab

Summary¶

This guide covered configuring Windows machines to access the centralized Samba network storage server. The setup involves mapping a network drive using the VM's IP address and storing credentials in Windows Credential Manager for persistent access. Each Windows user account requires independent configuration, but all authenticate with the same Samba credentials. The mapped drive automatically reconnects on reboot and provides transparent access to the shared storage as if it were a local drive.

The storage is accessible both locally via \\192.168.1.167\storage and remotely via Tailscale using the VM's Tailscale IP address. This provides flexible access to 1.7 TB of shared storage from any Windows machine on the network or connected via Tailscale VPN.

Tested Configuration: Windows 10/11 with user accounts mark and mary
Date Configured: December 22, 2024
Status: ✅ Working - drive auto-reconnects on reboot, credentials persistent across sessions

Windows Access to Samba Network Storage